CUSTOM EASYTOW GALVANISED TRAILER KEY FEATURES:

Your new Cruise Craft boat comes standard with an EasyTow galvanised trailer, specifically matched to suit your new Cruise Craft boat. Given that your boat will likely spend more time on the trailer than in the water, it makes sense to specify the trailer made and recommended by Cruise Craft.
Your trailer will be perfectly balanced, tow well and make launching and retrieval a breeze. Take the worry out of towing, with a smart perfectly matched Cruise Craft boat trailer.

Standard Equipment on this trailer includes:

  • Goodyear/Dunlop Tyres
  • ‘Clear Lens’ LED lights with Tinned Wire
  • Wide Target Area (W.T.A) for bringing your boat onto the trailer
  • Japanese NSK Bearings with Valvoline Grease
  • Stainless Steel Bearing Buddies
  • D.G.S. – Easytow’s ultra-strong Drive-On Guidance System designed to direct your boat’s keel towards the centre of the trailer.
  • High Quality Rollers with a sleeve and stainless pin system on the keel rail
  • Australian Polyethylene
  • Quality couplings and jockey wheels
  • Steps over the lights
  • Quality Hubs, Axles and U-bolts
  • Forgiving/Swinging Number Plate Mount
  • Premium Winch & Jockey Wheel
  • Poly Guides
  • Galvanised Springs, discs, hubs.
  • Great looking Alloy Wheels
  • Australian Mills steel
  • High grade fittings all around the trailer.
  • Custom Built to suit your Cruisecraft model boat.
  • Stainless Steel Calipers Standard on all models with GTM over 2tone that require Hydraulic Calipers.
  • Stainless Steel brake cable standard on mechanically braked trailers
  • Designed and manufactured specifically to suit your Cruise Craft model boat

EASYTOW ALUMINIUM TRAILER KEY FEATURES:

Standard Equipment on this trailer includes:

  • Goodyear/Dunlop Tyres
  • Wide Target Area (W.T.A) for bringing your boat onto the trailer
  • LED Auto LED Lights with Tinned Wire
  • Premium Grade Jockey Wheels
  • Japanese NSK bearings
  • SupaLube Bearing Protection
  • D.G.S. – Easytow’s ultra-strong Drive-On Guidance System designed to direct your boat’s keel
  • Brushed Alloy Custom Guards
  • High Quality Rollers with a sleeve and stainless pin system on the keel rail
  • Australian Polyethylene
  • Quality couplings and jockey wheels
  • Weight reduction aiding in vehicle choice and fuel efficiency
  • Independent Torsion bar axles system with removable stub. Torsion bar is aligned to a higher standard than slipper springs and has an superior absorber effect creating a smoother ride
  • Vented rotors, cool quicker increasing braking performance and reducing brake fade
  • Increased brake performance due to matched higher PSI Dexter brake actuator or override hydraulic activator depending on model
  • Stainless steel brake calipers
  • Stainless Steel Brake Lines (with some brass fittings)
  • HEAVY DUTY I Beam Rails for less flex- common with other alloy trailers
  • Superior appearance over time creating that newer look for longer, also aids resale
  • Premium Winch
  • Poly Guides
  • Great looking Alloy Wheels
  • Designed and manufactured specifically to suit your Cruise Craft model boat

CUSTOM CRUISE CRAFT GALVANISED STEEL TRAILER FEATURES:

Standard Equipment on this trailer includes:

  • Bearing Buddies
  • Cruise Craft Mud Flaps & Decals
  • LED Lights All Round (Tail & Side Clearance)
  • Machined Finish Alloy Wheels
  • Powder Coated Guards
  • Rear Cradle Protectors
  • Front step with SeaDek for Non-Slip
  • Spare Wheel & Carrier with Wheel Cover
  • WalkWay – Offset to Side

CUSTOM CRUISE CRAFT ALLOY SERIES TRAILER FEATURES:

Explorer 568ST | F360S:

  • Large ‘V’ entry & centering guides throughout trailer
  • Premium Black & Silver Alloy Wheels
  • Painted Gunmetal Grey Mudguards
  • Matching Spare and Carrier
  • Full keel ladder rack
  • Large side supports
  • All areas of support covered for protection when launching and retrieving
  • H/D transom tie down points
  • LED lights & Side Lights
  • Quality sleeved 12” Keel rollers
  • Quality couplings, Jockey Wheel and winch
  • Step on winch post to assist with launch and retrieval
  • Custom designed and manufactured in Brisbane

Explorer 635ST/HT | Outsider 635ST/HT | E695HT | Explorer 720ST/HT:

  • Large ‘V’ entry & centering guides throughout trailer
  • Quality Torsion Bar suspension
  • Japanese NSK Bearings
  • Stainless Steel Brake Lines
  • Premium Black & Silver Alloy Wheels
  • Painted Gunmetal Grey Mudguards
  • Matching Spare and Carrier
  • Full keel ladder rack
  • Large side supports
  • All areas of support covered for protection when launching and retrieving
  • H/D transom tie down points
  • LED lights & Side Lights
  • Quality sleeved 12” Keel rollers
  • Quality couplings, Jockey Wheel and winch
  • Step on winch post to assist with launch and retrieval
  • Custom designed and manufactured in Brisbane